$15,000 · 1977 Custom Sailing Vessel - Sloop 27'

1977 Bjorn Design sailing vessel, molded FRP (Fiberglass Re-enforced Plastic) hull sold originally in a kit form and the balance of the vessel is home built.   Professionals worked along with the original builder to ensure the engine, rigging and other critical aspects of the vessel were appropriately installed.    The Trunk Deck and aft Cockpit and FRP over wood nonskid, with 8 sealed portholes for light and visibility.   The forward sail is Roller Furling, the mast is Extruded Aluminum as is the main sail boom.   The railings are Stainless Steel with 2 coated life lines extending from the   rear cockpit to the bow.   There are wood hand rails on the Trunk leading forward.   The ground tackle is managed with a horizontal winch with gypsy and roller with a bow roller and   Bruce Galvanized Anchor.   Steering is a tiller style with autohelm. The rear cockpit is FRP over wood frame with canvas snap in windows and a SS top rail.   The cockpit has a stern rail of SS, boarding ladder, Kuma BBQ, 2 hp Honda Outboard with a Mercury inflatable composite bottom inflatable on the forward deck. The interior headliner and sides are foamed, the finish is mostly wood mahogany with Arborite counter tops.   It has an inboard diesel, galley to starboard, navigation table (centre) to port, long settee's on both sides with a drop leaf galley table center cabin.   The head is forward on the port side with storage across the companionway and a v-berth forward.   The interior finish is in good condition, sides of the cabin are covered with soft wood 2" slating.